News & Events

MCC Adds 1200V SiC Power MOSFETs to Innovative Lineup

Written by MCC | Jan 12, 2023 2:55:43 AM

Specifications:

  • 1200V Drain-Source Voltage (VDS)
  • -8V/22V Gate-Source Voltage (VGSmax)
  • -4V/18V Gate-Source Voltage (VGSop)
  • 38A continuous Drain Current (ID) [SICW080N120Y-BP] / 39A continuous Drain Current (ID) [SICW080N120Y4]
  • 80A Pulsed Drain Current (IDM)
  • 220W total power dissipation at 25°C (TC) [SICW080N120Y-BP]/ 223W total power dissipation at 25°C (TC) [SICW080N120Y4]
  • 94W total power dissipation at 110°C  (TC) [SICW080N120Y-BP]/ 97W total power dissipation at 110°C  (TC) [SICW080N120Y4]
  • -55°C to 175°C operating and storage temperature range 
  • 0.68°C /W junction to case thermal resistance

Applications:

Battery Charging Industrial Renewables
  • High-voltage DC/DC Converters
  • Battery Chargers
  • Industrial Chargers
  • Off Board Chargers
  • Power Factor Correction
  • AC-DC High-Power SMPS
  • Motor Drivers
  • Solar Inverters
  • Energy Storage
  • Wind Turbines

 

Typical Applications:

One-Phase Full Bridge PFC (Unidirectional) + Full-Wave LLC DC/DC Converters:

This AC/DC converter can be used for Consumer and Industrial applications, such as streetlights, laptops and cell phone chargers, fan and motor controllers, etc. This is a unidirectional SMPS. 

 

 

Three-Phase 2-Level Full-Bridge PFC (Bidirectional) + Half-Bridge LLC DC/DC Converters: 
This AC/DC converter can be used on EV charging stations, on-board chargers, inverters (wind turbines and solar panels). This is a bidirectional SMPS. 

 

 

Three-Phase 3-level Vienna PFC (Unidirectional):
This is one of the various topologies used for high-power three-phase power factor corrections (PFC) applications. This topology provides low THD of the input grid.

 

 

Three-Phase High-Voltage, High-Power Motor Control (Single Phase PWM Rectifier + Three-Phase PWM Inverter):
High-power applications require regulating and controlling inductive system loads to avoid power loss, dephasing of AC lines, and increased energy bills a sudden power surge could create. A frequency inverter, like the one in the schematic, is necessary to prevent this from happening.

 

 

Parametrics, Datasheets & ECAD file:


Product

 Type Package

Drain-source Voltage (VDS)

 Gate Source Voltage (VGSmax) RDS(ON)
Max		 Continuous Drain Current (ID)

Datasheet
SICW080N120Y-BP SiC MOSFETs TO-247-3 1200V -8V/ +22V 0.085 38A Datasheet
SICW080N120Y4 SiC MOSFETs TO-247-4 1200V -8V/ +22V 0.085 39A Datasheet

 

The SICW080N120Y-BP ECAD file is also available to aid in product design.

Use the MCC website chatbot to request a sample or ask a question.

 
View full post